Ritec partner

Explosion Panels

BS&B is our brand for explosion panels. We take care of sizing, selection, supply, spare parts and service. BS&B →

Explosion vent panels for dust and gas explosion relief on silos, filters, dryers, cyclones and conveyors: domed and flat, round and rectangular, with integral gaskets and optional burst sensors.

Also known as: explosion vent, rupture panel, venting panel, NFPA 68, EN 14797.

Your request

Add this to your request. We come back with a quotation or the right part.

We will ask for: Tag number, Serial number.

Models

Vent-Saf11

BS&B Vent-Saf VSP / VSS domed explosion vent

Domed single-section metal explosion vent with integral gaskets, rectangular 230 × 305 mm to 1130 × 1727 mm and round 406 to 1118 mm. The dome resists vacuum and vacuum cycling. NFPA 68 and ATEX tested.

BS&B Vent-Saf VSM explosion panel

Single-section explosion panel with integral outlet frame and gaskets, 227 × 305 mm to 1130 × 1727 mm, designed for dust collectors, cyclones and conveyors.

BS&B Vent-Saf VSP-L flat explosion vent

General purpose flat explosion vent with integral outlet frame and gaskets, rectangular 230 × 305 mm to 1130 × 1727 mm and round 406 to 1118 mm.

BS&B Vent-Saf VSE explosion vent

Flat single-section metal explosion vent with integral gaskets for near-static operating pressures, rectangular 230 × 305 mm to 1130 × 1727 mm and round 406 to 1118 mm.

BS&B Vent-Saf VSB building vent

Very low pressure explosion vent for buildings and rooms, up to 1220 × 1830 mm, with optional translucent construction so the vent doubles as a window.

BS&B Vent-Saf EXP explosion vent

Flat composite explosion vent with slotted 316 stainless top section and FEP/PTFE seal, 230 × 305 mm to 1130 × 1727 mm, available with high-temperature insulation.

BS&B Vent-Saf EXP-V vacuum-supported explosion vent

Flat composite explosion vent with slotted 316 stainless top, FEP/PTFE seal and an inlet-side light-duty vacuum support, 230 × 305 mm to 1130 × 1727 mm.

BS&B Vent-Saf EXP-DV round explosion vent

Round domed composite explosion vent with integral inlet-side vacuum support and gaskets, 406 to 1118 mm diameter, for cyclones, bins and round ducts.

BS&B Vent-Saf LCV light cycling explosion vent

Flat single-section metal explosion vent with integral gaskets designed for light pressure cycling duty, 230 × 305 mm to 1130 × 1727 mm.

BS&B Vent-Saf HTV high temperature explosion vent

Domed explosion vent with insulation for service at 538 °C and above, 227 × 305 mm to 1130 × 1727 mm, for dryers, furnaces and hot gas systems.

BS&B Vent-Saf vent sensors and deflectors

Accessories for explosion vents: magnetically activated burst sensors (MBS) that signal a ruptured vent instantly, and vent deflectors that direct the pressure wave and flame upwards away from personnel.

Not seeing the size, connection or rating you need? Most of these models are built to order and our suppliers' engineers adapt them. Send us what you have and we work it out. Send us your requirement →